Visonic CL-80

VISONIC CL-80
OUTDOOR 56 USER KEYPAD

Features:

• The CL-80 is a stand-alone digital keypad for access control applications.
• It is weatherproof (IP54) for outdoor/indoor use.
•  It activates a built-in, high-powered relay and operates from a 12/24 V AC or DC power supply.
• The CL-80, permits up to 56 individual access codes.
• The CL-80 can be integrated with an alarm system for enhanced security.
•  The tamper switch output can trigger the alarm system.
• The panic output can also activate the alarm.
• Data is entered into the EEPROM unaffected by power failures.

Specifications:

• Code composition: 1 to 8 digits, any combination
• Keypad type: 12 keys in 3 X 4, tactile operation
• Operating voltage: 9-16 or 22-26V AC/DC - selectable
• Current drain Stand-by state: 15 mA. Relay and auxiliary output active: 55 mA
• Power failure immunity: EEPROM retains all programmed data even during total power loss
• Relay contact ratings: 10A, 28 V AC or DC
• Relay control: Programmable for contact closure duration: 1–98 sec, or for toggle (latch) mode
• Auxiliary and panic output current: Up to 100 mA (protected by 18-ohm series resistor)
• LEDs: Green provides status information, red and yellow optional indication have 1k series resistors and terminals for external connections.
• Operating temperature: -20°C to 65°C (-4°F to 149°F)
• Dimensions: (W x H x D): 82 x 122 x 31 mm (3-1/2 x 4-13/16 x 1-1/4 in)
• Weight: 200 g (7.06 oz) including rubber gasket
• Tamper switch: The dual function tamper switch is designed to detect attempts to open unit or remove it from wall.
• Color: Dark gray