Adams Rite MS1850SN-050 Hookbolt Deadbolt for Wood or Hollow Metal Doors

Adams Rite MS1850SN-050 Hook Deadbolt

ANSI Size for Sliding Doors

Features:

For hollow metal or wood doors prepared for hardware according to the specifications of the American National Standards Institute, this MS deadbolt provides maximum security and ease of installation. Its standard 1-1/2" backset dimension provides adequate clearance for the deep stop on the door jamb of hollow metal entrances.

360 turn of key or thumbturn throws or retracts the counterbalanced bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder from either or both sides. Cylinder must have MS cam. Mortise thumbturn can be used too.

Case: Steel with corrosion-resistant plating. 1" x 6" x 2-1/4".

Bolt: 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw. Eight ply laminated stainless steel. Center ply has Alumina-Ceramic core to defeat any hacksaw attack, including rod-type "super" hacksaws.

Backset: 1 1/2" only

Manufacturer: Adams Rite
SKU:	ADAMS-74-0000
MPN:	Adams RIte MS1850SN-050
Unit:	Each