Adams Rite 4530 Deadlatch for Aluminum Stile Doors

Adams Rite 4530 Deadlatch for Aluminum Stile Doors

Features:

• Cylinder Backset: 7/8", 31/32" or 1-1/8" only.
• Case: Steel with corrosion-resistant plating. 1" x 5-13/16" x depth. (depth varies by backset).
• Strikes: Standard strike furnished is 4901-01 for flat jamb. For dimensions of this as well as radiused and/or short strikes.
• Function: 4530 Series Deadlatches are designed to fit, without alteration, the stile cutout for older MS1850* Series Deadbolts of same backset. (They do not, however, provide the maximum security level of the MS Deadbolt and should not be considered an equivalent replacement.) Also replaces, without alteration, older 4250 Series Deadlatches.
• Latch Bolt: 1/2" x 1" x 1/2" throw. All metal with hardened steel internal pins. Handing is easily reversible without special tools.
• Auxiliary Bolt: All metal. Deadlocks latch bolt to prevent "loiding" or case-knife entry.
• Operation: Turn key or operate handle to retract spring-loaded latch bolt. To hold bolt retracted, push it in and secure by reverse turn of key. Use standard mortise cylinder with MS cam.
• Bolt Holdback: A reverse turn of the key (while bolt is held full retracted) retains the bolt, allowing the door to be free swinging.