Adams Rite 5017 Wood Door Deadbolt

Adams Rite 5017 Hook Wood Door Deadbolt

The 5017 Deadbolt is for wood framed sliding doors and provides the same thousand pound strength that the MS1847 Deadbolt provides for metal stiles. By using a deeper backset, it clears the recessed jamb used with wood doors. Bolt throw is easily adjusted by means of a screw in the faceplate. Mounting is by through-bolts, which also secure the inside turn and outside cylinder when installed. (sold separately)

Features:

• Backset: 1-3/16" (1.25 including faceplate).
• Case: 1/2" x 4 x 1-19/32" deep. Stainless steel. Bolts is laminated stainless steel.
• Faceplate: 5/8" x 4-1/2" with radiused ends. Stainless steel.
• Operation: 45 degree rotation of turn or key throws or retracts bolt. Bolt is self protecting: if door is shut while bolt is extended, it will retract, preventing damage or accidental lockout.

• 1015 Turn: is used  with 1016 blank plate shown for doors from .625 to 2.25 thickness. Without blank plate turn available (for use with cylinder pull) on doors from 1.42 to 2.00 thickness. Standard finish Ritecoat 130, Satin Aluminum enamel.
• 1016 Outside Trim Plate: used with the 1015 above, when you are not using a cylinder. Standard finish Ritecoat 130, Satin Aluminum enamel.
• 4026 Cylinder Pull:  Five Pin-tumbler cylinder in zinc alloy housing.  Standard finish Ritecoat 130 Satin Aluminum.
• 4810 Box Strike:  used with  hook deadbolt designed for wood door frame