Product Description
Von Duprin 050237 Solenoid Kit — Replacement for 6000 Series Electric Strikes
The Von Duprin 050237 is the factory replacement solenoid assembly for Von Duprin 6000-series electric strikes including the 6111, 6112, 6113, 6211, 6212, 6223, 6224, and 6226. When a Von Duprin strike stops releasing or becomes intermittent, the solenoid is the first component to check. This kit includes the solenoid coil, plunger, and mounting hardware — everything you need to get the strike back in service without replacing the entire unit.
⚡ Fail Safe vs. Fail Secure — What's the Difference?
Fail Safe — Strike unlocks when power is lost. The door can be opened freely during a power outage. Required on most fire-rated egress doors for life safety. This is the default for fire exits and emergency egress paths.
Fail Secure — Strike remains locked when power is lost. Key override is always available from outside. Used for server rooms, evidence rooms, or anywhere security must be maintained during a power failure. The mechanical push bar still allows free egress from inside.
Pro-Tip from Our Locksmiths: Before you swap the solenoid, check the voltage at the strike body with a meter. Nine times out of ten, what looks like a bad solenoid is actually a wiring issue or a power supply that's drifted out of spec. If you're getting clean voltage and the strike still won't release, then swap the solenoid. Takes about 15 minutes in the field.
| Brand | Von Duprin (Allegion) |
| Part Number | 50237 |
| Type | Replacement Solenoid Kit |
| Compatible With | Von Duprin 6000 Series Electric Strikes |
| Warranty | 3-year limited (electronic components) |
Compatible With: Von Duprin 6111, 6112, 6113, 6114, 6121, 6210, 6211, 6211AL, 6211WF, 6212, 6212WF, 6213, 6214, 6215, 6216, 6223, 6224, 6224AL, 6226 series electric strikes.
Image shown is representative of the product line. Actual finish, trim, and configuration may vary by SKU.