Product Description
ALX53PD-SAT-613 Schlage ALX Series Cylindrical Lever Lock — Entrance Lock, Saturn Lever, Oil Rubbed Bronze
A front desk door needs two kinds of locked. Locked until the next person opens it, and locked until somebody means to unlock it. The ALX53 has a push/turn button in the inside lever for that. Push the button and a key or a turn of the inside lever unlocks the door, same as an office lock. Push and turn it and they only pull the latch back; the outside lever stays locked until the button is turned back to its start position. The key outside never locks this lock.
This one is the Saturn lever on the Rhodes rose, with a key-in-lever conventional 6-pin cylinder in the Schlage C keyway, keyed different, in Oil Rubbed Bronze. Saturn is the only ALX lever Schlage rates Grade 2 instead of Grade 1, and it comes key in lever only, so no interchangeable core on this lever. The latch is a deadlatch. Want the outside lever to spin free when locked? Schlage sells that as Vandlgard, catalog number ALXV53. Pick your backset in the dropdown: 2-3/4" is standard, 2-3/8" is the other choice. Measure from the door edge to the center of the bore before you order.
SKU Breakdown
| Segment | Code | What It Means |
|---|---|---|
| Series | ALX | Schlage ALX Series, a Grade 2 cylindrical lever lock |
| Function | 53 | Entrance Lock: push/turn button inside; key outside does not lock |
| Cylinder | PD | Conventional 6-pin key cylinder, C keyway, keyed different |
| Lever | SAT | Saturn lever on the Rhodes rose |
| Finish | 613 | Oil Rubbed Bronze (US10B) |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | ALX53PD-SAT-613 |
| Series | Schlage ALX Series |
| Function | Entrance Lock, ANSI F109 |
| Lock grade | ANSI/BHMA A156.2 Grade 2, Series 4000 |
| Lever | Saturn, Grade 2, key in lever. 4-7/16" wide, 2-15/16" projection, pressure cast zinc |
| Rose | Rhodes, 3-7/16" diameter, wrought |
| Cylinder | 6-pin conventional, solid brass |
| Keyway | Schlage C, keyed different |
| Cylinder plug finish | 522, Schlage's simulated 613 |
| Backset | 2-3/4" standard, 2-3/8" by the dropdown on this page |
| Door thickness | 1-3/8" through 1-3/4" |
| Latch | Deadlatch, stainless steel bolt, 1/2" throw, 1-1/8" x 2-1/4" square corner faceplate |
| Strike | ANSI curved lip, 1-1/4" x 4-7/8", 1-3/16" lip, no dust box |
| Handing | Non-handed |
| Chassis | Steel, zinc dichromated |
| Finish | 613 / US10B Oil Rubbed Bronze |
| Warranty | 10-year limited |
Compliance & Codes
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2. ANSI function F109. UL and cUL listed for A label fire doors: single door 4' x 8' or 4' x 10', 3-hour; pair of doors 8' x 8', 3-hour, or 8' x 10', 90-minute. The letter F and the UL symbol on the latch front show the listing. Complies with ICC A117.1. Schlage states all ALX lever designs meet ADA requirements. Meets FF-H-106C Series 161.
What's in the Box
One complete lock: Saturn levers and Rhodes roses, chassis, deadlatch, ANSI strike, 6-pin cylinder and two nickel silver cut keys. Control keys are not furnished with the lock.
Pro-Installer FAQ
Q: What is the catch with the push/turn button?
A: Lock-out. If you walk out with the button pushed and turned and do not fully release it, the outside lever stays locked behind you. Schlage prints that caution on this function, so tell whoever uses the door.
Q: Will this key into my building's system?
A: Only if your building runs the Schlage C keyway. It ships keyed different, not master keyed. Schlage's standard keyway on most new ALX orders is Everest 29 S123, and that is a different key, so check which one you have before you order.
Q: Can I get this with an interchangeable core, or in Grade 1?
A: Not on the Saturn lever. Schlage rates Saturn Grade 2 and builds it key in lever only. Other ALX levers such as Rhodes are Grade 1 and take FSIC or SFIC. If the whole door has to be a Grade 1 lock, step up to the Schlage ND Series.
Lock Depot sells brand new Schlage products with the full manufacturer warranty.
Product images are representative and may not depict the exact SKU, finish, or configuration listed. Always verify specifications before ordering.