Hardware

5BB1WT-4-5x6-652 IVES 5 Knuckle Ball Bearing Full Mortise Wide Throw Hinge in Satin Chrome Plated

5BB1WT-4-5x6-652 IVES 5 Knuckle Ball Bearing Full Mortise Wide Throw Hinge in Satin Chrome Plated The IVES 5BB1WT-4-5x6-652 hinges are used for standard weight doors with medium frequency usage. The 5BB1 Hinges are certified to the ANSI/BHMA A156.1...

5PB1-3-5x3-5-613 IVES 5 Knuckle Plain Bearing Full Mortise Hinge in Dark Bronze

The Ives 5PB1 is a 5-knuckle plain bearing full-mortise butt hinge measuring 3-1/2" x 3-1/2". It mortises into the edge of the door and the frame rabbet, carrying standard weight swinging doors on interior and exterior openings. Plain-bearing...

5PB1-4-5x4-5-639 IVES 5 Knuckle Plain Bearing Full Mortise Hinge in Satin Bronze Plated

The Ives 5PB1 is a 5-knuckle plain bearing full-mortise butt hinge measuring 4-1/2" x 4-1/2". It mortises into the edge of the door and the frame rabbet, carrying standard weight swinging doors on interior and exterior openings. Plain-bearing...

700-US32D-83 IVES Pin and Barrel Continuous Hinges in Satin Stainless Steel

The Ives 700 is a geared continuous hinge that distributes door weight along the full length of the door edge, eliminating the wear points of conventional butt hinges on high-traffic openings. Running the full height of the opening, it spreads the load...

7212V-SET-US26-RH IVES 7212 3/4" Offset Tap & Bottom Pivot Jamb Mount in Bright Chrome

7212V-SET-US26-RH IVES 7212 3/4" Offset Tap & Bottom Pivot Jamb Mount in Bright Chrome The IVES 7212V-SET-US26-RH pivots reduce stress on the frame by distributing the door weight throughout the floor and structure. By taking advantage of the structure...

7253-SET-SP28 IVES 7253 1-1/2" Center Hung Top & Bottom Pivot in Sprayed Aluminum

7253-SET-SP28 IVES 7253 1-1/2" Center Hung Top & Bottom Pivot in Sprayed Aluminum The IVES 7253-SET-SP28 pivots reduce stress on the frame by distributing the door weight throughout the floor and structure. By taking advantage of the structure quality,...

8190HD-18-US10B IVES 1" Round 90 Degree Offset Door 18" Pull in Oil Rubbed Bronze

8190HD-18-US10B IVES 1" Round 90 Degree Offset Door 18" Pull in Oil Rubbed Bronze The IVES 8190HD-18-US10B Architectural door trim offers various pulls to meet opening and project needs, no matter the door's design, size, type or location. This series is...

8302-8-US4-4x16 IVES Architectural Door Trim 4x16 Inch Pull Plate in Satin Brass

The Ives 8302 is a pull plate. A pull plate gives a clean grip area on the pull side of the door and shields the finish around the handle from wear and fingerprints. Pull projection: 8" center-to-center. Size: 4" x 16". Finish: Satin Brass. A simple,...

8311-5-US28-4x16 IVES Architectural Door Trim 4x16 Inch Pull Plate in Aluminum

The Ives 8311 is a pull plate. A pull plate gives a clean grip area on the pull side of the door and shields the finish around the handle from wear and fingerprints. Pull projection: 5" center-to-center. Size: 4" x 16". Finish: Aluminum. A simple,...

8311-5-US3-3-5x15 IVES Architectural Door Trim 3.5x15 Inch Pull Plate in Bright Brass

The Ives 8311 is a pull plate. A pull plate gives a clean grip area on the pull side of the door and shields the finish around the handle from wear and fingerprints. Pull projection: 5" center-to-center. Size: 3-1/2" x 15". Finish: Bright Brass. A...

8400-US32D-4x30-B-CS Ives 8400 Series Protection Plate in Satin Stainless Steel

The Ives 8400 is a protection plate that mounts to the face of the door to guard the finish from carts, kick marks, and daily wear. Size: 4" x 30". Edges are beveled on all four sides (B4E) for a finished look and to reduce snagging. Pre-drilled with...

8400-US32D-8x28-B-CS Ives 8400 Series Protection Plate in Satin Stainless Steel

8400-US32D-8x28-B-CS Ives 8400 Series Protection Plate in Satin Stainless SteelThe Ives 8400-US32D-8x28-B-CS series is designed for superior performance in residential, commercial and UL-specified applications. Plates have the choice of ensuring that the...

903S-652 Glynn Johnson 90 Series Heavy Duty Surface Overhead Stop Only in Chrome-like Coating

903S-652 Glynn Johnson 90 Series Heavy Duty Surface Overhead Stop Only in Chrome-like Coating Finish The Glynn Johnson 903S-652 90 Series surface-mounted holders and stops are rugged models designed for the heavy duty applications. The 90 series are...

904H-652-SHIM-2 Glynn Johnson 90 Series Heavy Duty Surface Overhead Hold Open with 1/2 inch Shim for Blade Stop Mounting in Chrome-like Coating

904H-652-SHIM-2 Glynn Johnson 90 Series Heavy Duty Surface Overhead Hold Open with 1/2" Shim for Blade Stop Mounting in Chrome-like Coating Finish The Glynn Johnson 904H-652-SHIM-2 90 Series surface-mounted holders and stops are rugged models designed...

905F-652-SHIM-2 Glynn Johnson 90 Series Heavy Duty Surface Overhead Friction Hold Open with 1/2 inch Shim for Blade Stop Mounting in Chrome-like Coating

905F-652-SHIM-2 Glynn Johnson 90 Series Heavy Duty Surface Overhead Friction Hold Open with 1/2 inch Shim for Blade Stop Mounting in Chrome-like Coating Finish The Glynn Johnson 905F-652-SHIM-2 90 Series surface-mounted friction hold open are rugged...

905H SPBLK Glynn Johnson 90 Series Heavy Duty Surface Overhead Hold Open in Black

905H-SPBLK Glynn-Johnson 90 Series Heavy Duty Surface Overhead Hold Open in Black Finish The Glynn-Johnson 905H-SPBLK 90 Series surface-mounted holders and stops are rugged models designed for the heavy duty applications. The 90 series are provides...