Hardware

5BB1SC-4-5-632 IVES 5 Knuckle Ball Bearing Swing Clear Full Mortise Hinge in Bright Brass Plated

The Ives 5BB1SC is a 5-knuckle ball bearing full-mortise butt hinge measuring 4-1/2". It mortises into the edge of the door and the frame rabbet, carrying standard to heavy weight swinging doors on interior and exterior openings. The ball-bearing...

5BB1SCHW-4-5-633 IVES 5 Knuckle Ball Bearing Swing Clear Full Mortise Hinge in Satin Brass Plated

The Ives 5BB1SCHW is a 5-knuckle ball bearing full-mortise butt hinge measuring 4-1/2". Built in a heavy-weight gauge (HW), it mortises into the edge of the door and the frame rabbet and is rated for heavy doors and high-frequency openings. The...

5BB1SCHW-4-5-641 IVES 5 Knuckle Ball Bearing Swing Clear Full Mortise Hinge in Oxidized Satin Bronze

5BB1SCHW-4-5-641 IVES 5 Knuckle Ball Bearing Swing Clear Full Mortise Hinge in Oxidized Satin Bronze The IVES 5BB1SCHW-4-5-641 hinges are used for heavy weight doors with high frequency usage. The 5BB1 Hinges are certified to the ANSI/BHMA A156.1...

5BB1WT-4-5x5-643 IVES 5 Knuckle Ball Bearing Full Mortise Wide Throw Hinge in Satin Bronze-Blackened

5BB1WT-4-5x5-643 IVES 5 Knuckle Ball Bearing Full Mortise Wide Throw Hinge in Satin Bronze-Blackened The IVES 5BB1WT-4-5x5-643 hinges are used for standard weight doors with medium frequency usage. The 5BB1 Hinges are certified to the ANSI/BHMA A156.1...

5BB1WT-4-5x6-652 IVES 5 Knuckle Ball Bearing Full Mortise Wide Throw Hinge in Satin Chrome Plated

5BB1WT-4-5x6-652 IVES 5 Knuckle Ball Bearing Full Mortise Wide Throw Hinge in Satin Chrome Plated The IVES 5BB1WT-4-5x6-652 hinges are used for standard weight doors with medium frequency usage. The 5BB1 Hinges are certified to the ANSI/BHMA A156.1...

5PB1-3-5x3-5-613 IVES 5 Knuckle Plain Bearing Full Mortise Hinge in Dark Bronze

The Ives 5PB1 is a 5-knuckle plain bearing full-mortise butt hinge measuring 3-1/2" x 3-1/2". It mortises into the edge of the door and the frame rabbet, carrying standard weight swinging doors on interior and exterior openings. Plain-bearing...

5PB1-4-5x4-5-639 IVES 5 Knuckle Plain Bearing Full Mortise Hinge in Satin Bronze Plated

The Ives 5PB1 is a 5-knuckle plain bearing full-mortise butt hinge measuring 4-1/2" x 4-1/2". It mortises into the edge of the door and the frame rabbet, carrying standard weight swinging doors on interior and exterior openings. Plain-bearing...

70-613 Don Jo 0.50 Push Plate with 3-1/2 x 15" (inches) in Oil Rubbed Bronze Finish

70-613 Don Jo 0.50 Push Plate 3 1/2 X 15" in Oil Rubbed Bronze Finish The Don Jo 70-613 0.50 Push Plate communicates an unmistakable message of quality and strength while maintaining a beautiful elegance that is normally not associated with door...

700-US32D-83 IVES Pin and Barrel Continuous Hinges in Satin Stainless Steel

The Ives 700 is a geared continuous hinge that distributes door weight along the full length of the door edge, eliminating the wear points of conventional butt hinges on high-traffic openings. Running the full height of the opening, it spreads the load...

71-605 Don Jo 0.50 Push Plate with 4 X 16" (inches) in Bright Brass Finish

71-605 Don Jo 0.50 Push Plate 4 X 16" in Bright Brass Finish The Don Jo 71-605 0.50 Push Plate communicates an unmistakable message of quality and strength while maintaining a beautiful elegance that is normally not associated with door hardware...

71-619 Don Jo 0.50 Push Plate with 4 X 16" (inches) in Clear Satin Nickel Finish

71-619 Don Jo 0.50 Push Plate 4 X 16" in Clear Satin Nickel Finish The Don Jo 71-619 0.50 Push Plate communicates an unmistakable message of quality and strength while maintaining a beautiful elegance that is normally not associated with door...

7130-630 Don Jo Pull Plate with Flat Pulls in Satin Stainless Steel Finish

7130-630 Don Jo Pull plate with 6" Center to Center length in Satin Stainless Steel Finish The Don Jo 7130-630 Pull plate communicates an unmistakable message of superb quality and high strength while maintaining a beautiful elegance that is usually...

7212V-SET-US26-RH IVES 7212 3/4" Offset Tap & Bottom Pivot Jamb Mount in Bright Chrome

7212V-SET-US26-RH IVES 7212 3/4" Offset Tap & Bottom Pivot Jamb Mount in Bright Chrome The IVES 7212V-SET-US26-RH pivots reduce stress on the frame by distributing the door weight throughout the floor and structure. By taking advantage of the structure...

7253-SET-SP28 IVES 7253 1-1/2" Center Hung Top & Bottom Pivot in Sprayed Aluminum

7253-SET-SP28 IVES 7253 1-1/2" Center Hung Top & Bottom Pivot in Sprayed Aluminum The IVES 7253-SET-SP28 pivots reduce stress on the frame by distributing the door weight throughout the floor and structure. By taking advantage of the structure quality,...

7254MPSO-LH-24VDC-693 Norton 7200 Series Electromechanical Closer and Holder with Double Egress Arm Slide Track Slave/Support Unit in Black

7254MPSO-LH-24VDC-693 Norton 7200 Series Electromechanical Closer and Holder with Double Egress Arm Slide Track Slave/Support Unit in Black Finish The Norton 7254MPSO-LH-24VDC-693 multi-point electromechanical closer/holder are providing flexibility to...

7570-689-RH Norton 7570 Series Security Door Closer with Regular Rigid Arm in Aluminum

7570-689-RH Norton 7570 Series Security Door Closer with Regular Rigid Arm in Aluminum Finish The Norton 7570-689-RH Security door closer is used for interior and exterior doors and is designed for use in prisons, government buildings, schools, financial...