Hardware

5015-REG-LH-AL LCN Concealed Door Closer with Regular Arm in Aluminum Finish

The LCN 5015 is a concealed, heavy-duty closer that mounts inside the door or frame for a clean, secure installation. Configured here as the LCN 5015 with regular arm in Aluminum. Adjustable closing...

5710-689 Norton 5700 Series Pull Side Closer Sizes 1-6 Low Energy Power Operator in Aluminum

5710-689 Norton 5700 Series Pull Side Closer Sizes 1-6 Low Energy Power Operator in Aluminum Finish The Norton 5710-689 low energy power operator is ideal for doctor's offices, retirement facilities,...

5BB1-3-5x3-5-619 IVES 5 Knuckle Ball Bearing Full Mortise Hinge in Satin Nickel

The Ives 5BB1 is a 5-knuckle ball bearing full-mortise butt hinge measuring 3-1/2" x 3-1/2". It mortises into the edge of the door and the frame rabbet, carrying standard to heavy weight swinging...

5BB1HW-4-5x4-5-605 IVES 5 Knuckle Ball Bearing Full Mortise Hinge in Bright Brass

The Ives 5BB1HW is a 5-knuckle ball bearing full-mortise butt hinge measuring 4-1/2" x 4-1/2". Built in a heavy-weight gauge (HW), it mortises into the edge of the door and the frame rabbet and is...

5BB1HW-5x4-5-613 IVES 5 Knuckle Ball Bearing Full Mortise Hinge in Dark Bronze

The Ives 5BB1HW is a 5-knuckle ball bearing full-mortise butt hinge measuring 5" x 4-1/2". Built in a heavy-weight gauge (HW), it mortises into the edge of the door and the frame rabbet and is rated...

5BB1HW-5x5-606-TW4 IVES 5 Knuckle Ball Bearing Full Mortise Hinge with Electric Thru-Wire in Satin Brass

5BB1HW-5x5-606-TW4 IVES 5 Knuckle Ball Bearing Full Mortise Hinge with Electric Thru-Wire in Satin Brass The IVES 5BB1HW-5x5-606-TW4 hinges are used for heavy weight doors with high frequency usage...

5BB1WT-5x6-632 IVES 5 Knuckle Ball Bearing Full Mortise Wide Throw Hinge in Bright Brass Plated

The Ives 5BB1WT is a 5-knuckle ball bearing full-mortise butt hinge measuring 5" x 6". It mortises into the edge of the door and the frame rabbet, carrying standard to heavy weight swinging doors on...

5BB1WT-5x6-646 IVES 5 Knuckle Ball Bearing Full Mortise Wide Throw Hinge in Satin Nickel Plated

The Ives 5BB1WT is a 5-knuckle ball bearing full-mortise butt hinge measuring 5" x 6". It mortises into the edge of the door and the frame rabbet, carrying standard to heavy weight swinging doors on...

6031-H-BUMPER-US4 LCN Double Acting Concealed Door Closer Hold Open Track with Bumper in Satin Brass Finish

The LCN 6031 is a concealed double-acting closer with standard track, built for double-acting doors that swing both directions. Configured here as the LCN 6031 with hold-open arm in Satin Brass...

6033-H-BUMPER-AL LCN Double Acting Concealed Door Closer Hold Open Track with Bumper in Aluminum Finish

The LCN 6033 is a concealed double-acting closer with standard track, built for double-acting doors that swing both directions. Configured here as the LCN 6033 with hold-open arm in Aluminum...

70-609 Don Jo 0.50 Push Plate with 3-1/2 x 15" (inches) in Satin Brass Finish

70-609 Don Jo 0.50 Push Plate 3 1/2 X 15" in Satin Brass Finish The Don Jo 70-609 0.50 Push Plate communicates an unmistakable message of quality and strength while maintaining a beautiful elegance...

700-US32D-120-SECHM IVES Pin and Barrel Continuous Hinges in Satin Stainless Steel

The Ives 700 is a geared continuous hinge that distributes door weight along the full length of the door edge, eliminating the wear points of conventional butt hinges on high-traffic openings...

7010-628 Don Jo Pull Plates with Cast Pull in Satin Aluminum Finish

7010-628 Don Jo Pull plate with 5 1/2" Center to Center length in Satin Aluminum Finish The Don Jo 7010-628 Pull plate communicates an unmistakable message of superb quality and high strength while...

7017-613 Don Jo Pull Plates with 3/4" (inches) Round Pulls in Oil Rubbed Bronze Finish

7017-613 Don Jo Pull plate with 10" Center to Center length in Oil Rubbed Bronze Finish The Don Jo 7017-613 Pull plate communicates an unmistakable message of superb quality and high strength while...

702-US32D-85-SECHM IVES Pin and Barrel Continuous Hinges in Satin Stainless Steel

The Ives 702 is a geared continuous hinge that distributes door weight along the full length of the door edge, eliminating the wear points of conventional butt hinges on high-traffic openings...

7037-630 Don Jo Pull Plate with Half Round in Satin Stainless Steel Finish

7037-630 Don Jo Pull plate with 6" Center to Center length in Satin Stainless Steel Finish The Don Jo 7037-630 Pull plate communicates an unmistakable message of superb quality and high strength...