Product Description
LD98L-DT-18 4 26D RHR Von Duprin 98 Series Dummy Trim Rim Exit Device in Satin Chrome
| Part Number Breakdown: LD98L-DT-18 4 26D RHR | |
|---|---|
| 98 | 98 Series Rim Exit Device |
| LD | Latch Detector |
| L | Lever Dummy Trim |
| 18 | 18 Lever Design |
| 26D | Satin Chrome (BHMA 626) |
| 4 | 4 Foot Door |
| RHR | Right Hand Reverse |
The LD98L-DT-18 4 26D RHR is a Von Duprin 98 Series Rim exit device with Latch Detector (LD) and Lever trim in Satin Chrome, sized for 4 Foot doors. Lever Dummy Trim — non-functioning outside lever for appearance only. Used on the inactive leaf of a pair of doors. No cylinder required.
Latch Detector — monitors the latch bolt position and reports status to the access control panel. 24VDC. ANSI/BHMA A156.3 Grade 1 certified. Hex key dogging standard.
Pro-Tip from Our Locksmiths: Lever dummy trim with Latch Detector goes on the inactive leaf of a pair. The LD still monitors the latch on this leaf — important for double-door configurations where both leaves need door status reporting back to the access control panel.
| Specifications | |
|---|---|
| Part Number | LD98L-DT-18 4 26D RHR |
| Brand | Von Duprin (Allegion) |
| Series | Von Duprin 98 |
| Electronics | LD — Latch Detector (24VDC) |
| Function | Dummy Trim |
| Lever Design | L-18 Lever |
| Grade | ANSI/BHMA A156.3 Grade 1 |
| Mount Type | Rim (horizontal latch bolt — strikes into frame on lock side) |
| Finish | Satin Chrome (26D/626) |
| Door Size | 4 Foot |
| Handing | Right Hand Reverse |
| Cylinder | No cylinder required for this function |
| Fire Rating | Non Fire Rated |
- Von Duprin 98 Series Rim exit device — Grade 1 architectural-grade panic hardware
- Latch Detector (LD) — monitors latch bolt position, reports to access control panel, 24VDC
- Rim (horizontal latch bolt — strikes into frame on lock side)
- Satin Chrome finish
- Hex key dogging standard — hold latch retracted during business hours
Cross-Reference: The LD98 is the 98 Series with factory-installed Latch Detector switch. Same mounting prep, same strike, same trim compatibility as the standard 98 — with the addition of latch bolt position monitoring for access control integration.
Image shown is representative of the product line. Actual finish, trim, and configuration may vary by SKU.
