Product Description
Grade 1 cylindrical lock — commercial-grade security in a standard bore install.
The Sargent 28-11G13-LL-04 is a Grade 1 cylindrical lock from the 11 Line with Exit Only function.
| SKU Breakdown: 28-11G13-LL-04 | |
| 28 | ANSI curved lip strike (#808) |
| 11G13 | Series and Exit Only function |
| LL | Lever/rose design: LL |
| 04 | Finish: Satin Brass |
This unit comes with L Rose, L Lever in Satin Brass — the 04 finish making a huge comeback in commercial design. Popular on boutique hotels, upscale office buildings, and any project where the architect wants warm tones. Cylindrical locks install in a standard 2-1/8" bore hole — no mortise pocket required. Fastest commercial lock to install.
Pro-Tip from Our Locksmiths: Cylindrical locks install in a standard 2-1/8" bore — no mortise pocket needed. That means faster install, lower labor cost, and an easier retrofit when replacing existing hardware. The through-bolt construction on Sargent's 10X Line gives you pull strength that rivals some mortise locks.
| Certification | ANSI A156.2, BHMA Grade 1 |
| Backset | 2-3/4" |
| Warranty | 10-Year Limited. Contact ASSA ABLOY at 1-800-727-5477. |
- ANSI/BHMA Grade 1 — highest commercial security rating for cylindrical locks
- Standard 2-1/8" bore — fast install, no mortise pocket needed
- Through-bolt mounting for maximum resistance to lever torque attacks
- Satin Brass finish
- Field reversible — works on any swing direction
Image shown is representative of this product line. Actual product matches your selected finish and configuration.
Warranty Information
Sargent provides a 10-year limited warranty on cylindrical locks covering defects in materials and workmanship under normal use and service. Warranty applies to the original purchaser when installed per Sargent specifications.Product Videos
Custom Field
Product Type Cylindrical Lock
Function Exit Only
Series 11
Finish Satin Brass
Trim L Rose, L Lever
Cylinder No cylinder required for this function
Mount Type Cylindrical