Product Description
Mortise exit devices latch through a mortise lock case set into the edge of the door — the same pocket a mortise lockset uses. The door must be prepped for the mortise case before you order.
The Sargent 4356-8973F-RHR-10 is a Grade 1 mortise exit device from the Sargent 80 Series (8900 mortise) for 36" openings with Fail Safe function.
| SKU Breakdown: 4356-8973F-RHR-10 | |
| 4356 | Options: 43 flush end cap, 56 motorized electric latch retraction |
| 8973F | Device model: 8973F |
| RHR | Right Hand Reverse |
| 10 | Finish: Satin Bronze |
This device is Right Hand Reverse. Exit devices are HANDED and cannot be reversed in the field. Stand outside the door facing it: hinges on the left = Left Hand, hinges on the right = Right Hand. If the door swings toward you, add "Reverse." Verify your handing before ordering.
Pro-Tip from Our Locksmiths: When specifying exit devices for double doors without a mullion, each leaf gets its own device. The active leaf (with the lock) gets the full device with trim. The inactive leaf gets a dummy push bar or flush bolt setup depending on the spec.
| Handing | Right Hand Reverse |
| Certification | ANSI A156.3, BHMA Grade 1 |
| Warranty | 3-Year Limited (electromechanical). Mechanical components: 5-Year Limited. Contact ASSA ABLOY at 1-800-727-5477. |
- ANSI/BHMA Grade 1 — highest commercial exit device rating
- Satin Bronze finish
Related Products:
- Browse all Sargent Exit Devices — Rim, mortise, surface vertical rod, and concealed vertical rod
Image shown is representative of this product line. Actual product matches your selected finish and configuration.
Warranty Information
Sargent provides a 3-year limited warranty on electromechanical components covering defects in materials and workmanship under normal use and service. Mechanical components retain their own warranty period. Warranty applies to the original purchaser when installed per Sargent specifications.Product Videos
Custom Field
Product Type Exit Device - Mortise Lock
Function Fail Safe
Series 80
Finish Satin Bronze
Mount Type Mortise
