Product Description
Rim exit devices are the simplest and most common configuration — the latch engages the strike at the edge of the door. One device, one strike, one installation.
The Sargent 56-8875E-12V-ETB-LHR-BSP is a Grade 1 rim exit device from the 80 Series for 32" openings with Fail Safe function.
| SKU Breakdown: 56-8875E-12V-ETB-LHR-BSP | |
| 56 | Door width (inches) |
| 8875E | Series 8800 device model |
| 12V | Device model: 12V |
| ETB | Thumbpiece trim |
| LHR | Left Hand Reverse |
| BSP | Finish: Black Suede |
c Lever provides outside access while the push bar handles emergency egress from inside.
Black Suede — a textured matte black finish that's more forgiving than smooth black. Hides scratches, fingerprints, and daily wear better than any polished finish.
Pro-Tip from Our Locksmiths: When specifying exit devices for double doors without a mullion, each leaf gets its own device. The active leaf (with the lock) gets the full device with trim. The inactive leaf gets a dummy push bar or flush bolt setup depending on the spec.
| Certification | ANSI A156.3, BHMA Grade 1, UL 10C |
| Warranty | 5-Year Limited (mechanical and 56- motor), 2-Year Limited (electromechanical) |
- ANSI/BHMA Grade 1 — highest commercial exit device rating
- c Lever — outside entry access
- Black Suede finish
Related Products:
- Browse all Sargent Exit Devices — Rim, surface vertical rod, and concealed vertical rod
Image shown is representative of this product line. Actual product matches your selected finish and configuration.
Warranty Information
Sargent provides a 5-year limited warranty on mechanical components of exit devices and on the 56- motorized electric latch retraction motor, and a 2-year limited warranty on other electromechanical components, covering defects in materials and workmanship under normal use and service. Warranty applies to the original purchaser when installed per Sargent specifications.Product Videos
Custom Field
Product Type Exit Device - Rim
Function Fail Safe
Series 80
Finish Black Suede
Trim c Lever
Mount Type Rim
Voltage 12VDC
Mode Fail Safe
