Product Description
The Sargent 8270-24V-LL-26D is an 8200 Series fail safe electrified mortise lock in Satin Chrome (US26D/626), Grade 1 commercial. It is built for access-controlled openings: the 24VDC version of Sargent's 8200 mortise chassis, wired into a card-reader or keypad system so the door unlocks on a valid credential and unlocks on power loss for life-safety egress.
Includes a standard conventional mortise cylinder (keyed). Need it without a cylinder? Order the LC-8270-24V-LL-26D less-cylinder variant instead.
What "LL" trim is / what ships: LL is the Sargent trim code for the L lever on the L rose — the L design lever mounted on a round sectional rose (not a full escutcheon plate). This SKU is the complete lockset: it ships with the LL lever trim on both the inside and outside of the door, mounted on the 8270 24V electrified mortise chassis. (Sargent also sells the bare mortise body by itself under a number with no trim letters, e.g. 8270-24V-26D "lock body only" — that is a different part. This SKU includes the trim.)
Access-control compatibility: This is the 24VDC electrified version of the 8200 mortise lock, so it drops into a wired access-control opening. Run it off a 24VDC access-control power supply and drive it from your keypads, card readers, or a relay/output module on the panel — card grants access, the panel switches power to the lock. Pairs with request-to-exit and door-position hardware the same as any electrified mortise on the door. It is the lock body only; specify your reader, power supply, and controller to match the opening.
Fail Safe vs. Fail Secure: This lock is Fail Safe — it unlocks when power drops. That is the life-safety / free-egress setup: kill power (or trip the fire alarm) and the door releases so people can get out. If instead you need the door to stay locked on a power loss (holding a secure area shut), that is Fail Secure — a different part, order the fail-secure 8200 24V configuration. On a "24V fail safe electric lock" the rule is simple: power on = locked, power off = open.
| SKU Breakdown: 8270-24V-LL-26D | |
| 8270 | Series 8200, Fail Safe function |
| 24V | Voltage: 24V |
| LL | Trim code: LL |
| 26D | Finish: Satin Chrome |
| Brand | Sargent (ASSA ABLOY) |
| Part Number | 8270-24V-LL-26D |
| Series | Sargent 8200 |
| Function | Fail Safe |
| Finish | Satin Chrome (US26D/626) |
| Mount Type | Mortise |
| Cylinder | Standard Conventional Cylinder (included) |
| Grade | ANSI/BHMA Grade 1 |
| Warranty | 10-Year Limited |
- Fail Safe function — Unlocks on power loss for life safety egress.
- Satin Chrome (US26D/626) finish — durable commercial-grade coating
- ANSI/BHMA Grade 1 certified — highest commercial security rating
- Includes a standard conventional mortise cylinder (keyed) — order the LC-8270-24V-LL-26D variant if you need it less cylinder.
Works With: Sargent 8200 Series mortise trim. Compatible with Sargent mortise cylinders in all standard keyways. For master key systems, consult your locksmith or call (877) 365-5625.
Free Expert Support — Lock Depot provides full manufacturer warranty coverage. Call (877) 365-5625 for personalized help.
Image shown is representative of the product line. Actual finish, trim, and configuration may vary by SKU.
