Product Description
ALX50PD-OME-605 Schlage ALX Series Cylindrical Lever Lock — Entrance/Office Lock, Omega Lever, Bright Brass
Somebody in an office wants to lock the door with a thumb and not hunt for a key. The ALX50 gives them that: a push button in the inside lever. Push it and the outside lever goes dead. A key from the hall, or a turn of the inside lever, lets it go again. Here is what catches people on the first day. The key unlocks this lock but it will not lock it. To lock up on the way out, push the button with the door open and pull the door shut. Turn the inside lever after pushing the button and you just unlocked it.
This one is the Omega lever on the Omega rose, with a key-in-lever conventional 6-pin cylinder in the Schlage C keyway, keyed different, in Bright Brass. The latch is a deadlatch. Want the outside lever to spin free when locked? Schlage sells that as Vandlgard, catalog number ALXV50. Pick your backset in the dropdown: 2-3/4" is standard, 2-3/8" is the other choice. Measure from the door edge to the center of the bore before you order.
SKU Breakdown
| Segment | Code | What It Means |
|---|---|---|
| Series | ALX | Schlage ALX Series, a Grade 2 cylindrical lever lock |
| Function | 50 | Entrance/Office Lock: push button inside locks the outside lever; key outside unlocks only |
| Cylinder | PD | Conventional 6-pin key cylinder, C keyway, keyed different |
| Lever | OME | Omega lever on the Omega rose |
| Finish | 605 | Bright Brass (US3) |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | ALX50PD-OME-605 |
| Series | Schlage ALX Series |
| Function | Entrance/Office Lock, ANSI F82 |
| Lock grade | ANSI/BHMA A156.2 Grade 2, Series 4000 |
| Lever | Omega, Grade 1. 5-1/16" wide, 3-5/16" projection, pressure cast zinc |
| Rose | Omega, 3-7/16" diameter, wrought |
| Cylinder | 6-pin conventional, solid brass |
| Keyway | Schlage C, keyed different |
| Cylinder plug finish | 606 |
| Backset | 2-3/4" standard, 2-3/8" by the dropdown on this page |
| Door thickness | 1-3/8" through 1-3/4" |
| Latch | Deadlatch, stainless steel bolt, 1/2" throw, 1-1/8" x 2-1/4" square corner faceplate |
| Strike | ANSI curved lip, 1-1/4" x 4-7/8", 1-3/16" lip, no dust box |
| Handing | Non-handed |
| Chassis | Steel, zinc dichromated |
| Finish | 605 / US3 Bright Brass |
| Warranty | 10-year limited |
Compliance & Codes
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2. ANSI function F82. UL and cUL listed for A label fire doors: single door 4' x 8' or 4' x 10', 3-hour; pair of doors 8' x 8', 3-hour, or 8' x 10', 90-minute. The letter F and the UL symbol on the latch front show the listing. Complies with ICC A117.1. Schlage states all ALX lever designs meet ADA requirements. Meets FF-H-106C Series 161.
What's in the Box
One complete lock: Omega levers and Omega roses, chassis, deadlatch, ANSI strike, 6-pin cylinder and two nickel silver cut keys. Control keys are not furnished with the lock.
Pro-Installer FAQ
Q: Why won't the key lock this from the hall?
A: It is not supposed to. On function 50 the key only unlocks; the inside button does the locking. If the key has to lock it from outside, you want the ALX70 classroom lock. If the door should always be locked, you want the ALX80 storeroom lock.
Q: Will this key into my building's system?
A: Only if your building runs the Schlage C keyway. It ships keyed different, not master keyed. Schlage's standard keyway on most new ALX orders is Everest 29 S123, and that is a different key, so check which one you have before you order.
Q: Is this a Grade 1 lock?
A: The Omega lever is rated Grade 1 by Schlage, but the ALX Series as a lock is certified Grade 2. If the spec says Grade 1 for the whole lock, step up to the Schlage ND Series.
Lock Depot sells brand new Schlage products with the full manufacturer warranty.
Product images are representative and may not depict the exact SKU, finish, or configuration listed. Always verify specifications before ordering.