Product Description
ALX80PD-ATH-605 Schlage ALX Series Cylindrical Lever Lock — Storeroom Lock, Athens Lever, Bright Brass
A supply closet or a mechanical room should never be left unlocked because somebody forgot. On the ALX80 nobody can forget. The outside lever is always locked. The key in the outside lever pulls the latch back for that one trip, and the door is locked again when it closes. The inside lever is always free, so nobody gets trapped.
This one is the Athens lever on the Rhodes rose, with a key-in-lever conventional 6-pin cylinder in the Schlage C keyway, keyed different, in Bright Brass. The latch is a deadlatch. Want the outside lever to spin free when locked? Schlage sells that as Vandlgard, catalog number ALXV80. Pick your backset in the dropdown: 2-3/4" is standard, 2-3/8" is the other choice. Measure from the door edge to the center of the bore before you order.
SKU Breakdown
| Segment | Code | What It Means |
|---|---|---|
| Series | ALX | Schlage ALX Series, a Grade 2 cylindrical lever lock |
| Function | 80 | Storeroom Lock: outside lever always locked; key retracts the latch |
| Cylinder | PD | Conventional 6-pin key cylinder, C keyway, keyed different |
| Lever | ATH | Athens lever on the Rhodes rose |
| Finish | 605 | Bright Brass (US3) |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | ALX80PD-ATH-605 |
| Series | Schlage ALX Series |
| Function | Storeroom Lock, ANSI F86 |
| Lock grade | ANSI/BHMA A156.2 Grade 2, Series 4000 |
| Lever | Athens, Grade 1. 4-9/16" wide, 3-5/16" projection, pressure cast zinc |
| Rose | Rhodes, 3-7/16" diameter, wrought |
| Cylinder | 6-pin conventional, solid brass |
| Keyway | Schlage C, keyed different |
| Cylinder plug finish | 606 |
| Backset | 2-3/4" standard, 2-3/8" by the dropdown on this page |
| Door thickness | 1-3/8" through 1-3/4" |
| Latch | Deadlatch, stainless steel bolt, 1/2" throw, 1-1/8" x 2-1/4" square corner faceplate |
| Strike | ANSI curved lip, 1-1/4" x 4-7/8", 1-3/16" lip, no dust box |
| Handing | Non-handed |
| Chassis | Steel, zinc dichromated |
| Finish | 605 / US3 Bright Brass |
| Warranty | 10-year limited |
Compliance & Codes
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2. ANSI function F86. UL and cUL listed for A label fire doors: single door 4' x 8' or 4' x 10', 3-hour; pair of doors 8' x 8', 3-hour, or 8' x 10', 90-minute. The letter F and the UL symbol on the latch front show the listing. Complies with ICC A117.1. Schlage states all ALX lever designs meet ADA requirements. Meets FF-H-106C Series 161.
What's in the Box
One complete lock: Athens levers and Rhodes roses, chassis, deadlatch, ANSI strike, 6-pin cylinder and two nickel silver cut keys. Control keys are not furnished with the lock.
Pro-Installer FAQ
Q: Can I hold this unlocked for the day?
A: No. The outside lever is always locked and the key retracts the latch only. If the room needs to stay open for a stretch, look at the ALX70 classroom lock, where the key locks and unlocks the outside lever.
Q: Will this key into my building's system?
A: Only if your building runs the Schlage C keyway. It ships keyed different, not master keyed. Schlage's standard keyway on most new ALX orders is Everest 29 S123, and that is a different key, so check which one you have before you order.
Q: Is this a Grade 1 lock?
A: The Athens lever is rated Grade 1 by Schlage, but the ALX Series as a lock is certified Grade 2. If the spec says Grade 1 for the whole lock, step up to the Schlage ND Series.
Lock Depot sells brand new Schlage products with the full manufacturer warranty.
Product images are representative and may not depict the exact SKU, finish, or configuration listed. Always verify specifications before ordering.
