Hardware

5PB1-4-5x4-5-633 IVES 5 Knuckle Plain Bearing Full Mortise Hinge in Satin Brass Plated

The Ives 5PB1 is a 5-knuckle plain bearing full-mortise butt hinge measuring 4-1/2" x 4-1/2". It mortises into the edge of the door and the frame rabbet, carrying standard weight swinging doors on interior and exterior openings. Plain-bearing...

5PB1-5x4-5-633 IVES 5 Knuckle Plain Bearing Full Mortise Hinge in Satin Brass Plated

The Ives 5PB1 is a 5-knuckle plain bearing full-mortise butt hinge measuring 1-1/2" x 4-1/2". It mortises into the edge of the door and the frame rabbet, carrying standard weight swinging doors on interior and exterior openings. Plain-bearing...

7110-630 Don Jo Pull Plates with Cast Pull in Satin Stainless Steel Finish

7110-630 Don Jo Pull plate with 5 1/2" Center to Center length in Satin Stainless Steel Finish The Don Jo 7110-630 Pull plate communicates an unmistakable message of superb quality and high strength while maintaining a beautiful elegance that is...

7114-613 Don Jo Pull Plates with 3/4" (inches) Round Pulls in Oil Rubbed Bronze Finish

7114-613 Don Jo Pull plate with 5 1/2" Center to Center length in Oil Rubbed Bronze Finish The Don Jo 7114-613 Pull plate communicates an unmistakable message of superb quality and high strength while maintaining a beautiful elegance that is usually...

7116-628 Don Jo Pull Plates with 3/4" (inches) Round Pulls in Satin Aluminum Finish

7116-628 Don Jo Pull plate with 8" Center to Center length in Satin Aluminum Finish The Don Jo 7116-628 Pull plate communicates an unmistakable message of superb quality and high strength while maintaining a beautiful elegance that is usually not...

7212-TOP-SP28-LH IVES 7212 3/4" Offset Top Pivot in Sprayed Aluminum

7212-TOP-SP28-LH IVES 7212 3/4" Offset Top Pivot in Sprayed Aluminum The IVES 7212-TOP-SP28-LH pivots reduce stress on the frame by distributing the door weight throughout the floor and structure. By taking advantage of the structure quality, this makes...

7212-TOP-SP28-RH IVES 7212 3/4" Offset Top Pivot in Sprayed Aluminum

7212-TOP-SP28-RH IVES 7212 3/4" Offset Top Pivot in Sprayed Aluminum The IVES 7212-TOP-SP28-RH pivots reduce stress on the frame by distributing the door weight throughout the floor and structure. By taking advantage of the structure quality, this makes...

7215-INT-US26-LH IVES 7215 3/4" Offset Intermediate Pivot in Bright Chrome

7215-INT-US26-LH IVES 7215 3/4" Offset Intermediate Pivot in Bright Chrome The IVES 7215-INT-US26-LH pivots reduce stress on the frame by distributing the door weight throughout the floor and structure. By taking advantage of the structure quality, this...

7215-INT-US26-RH IVES 7215 3/4" Offset Intermediate Pivot in Bright Chrome

7215-INT-US26-RH IVES 7215 3/4" Offset Intermediate Pivot in Bright Chrome The IVES 7215-INT-US26-RH pivots reduce stress on the frame by distributing the door weight throughout the floor and structure. By taking advantage of the structure quality, this...

7253-BTM-SP28 IVES 7253 1-1/2" Center Hung Bottom Pivot in Sprayed Aluminum

7253-BTM-SP28 IVES 7253 1-1/2" Center Hung Bottom Pivot in Sprayed Aluminum The IVES 7253-BTM-SP28 pivots reduce stress on the frame by distributing the door weight throughout the floor and structure. By taking advantage of the structure quality, this...

7253-SET-US26 IVES 7253 1-1/2" Center Hung Top & Bottom Pivot in Bright Chrome

7253-SET-US26 IVES 7253 1-1/2" Center Hung Top & Bottom Pivot in Bright Chrome The IVES 7253-SET-US26 pivots reduce stress on the frame by distributing the door weight throughout the floor and structure. By taking advantage of the structure quality, this...

8302-8-US3-4x16 IVES Architectural Door Trim 4x16 Inch Pull Plate in Bright Brass

The Ives 8302 is a pull plate. A pull plate gives a clean grip area on the pull side of the door and shields the finish around the handle from wear and fingerprints. Pull projection: 8" center-to-center. Size: 4" x 16". Finish: Bright Brass. A simple,...

8400-US10B-10x34-B-CS Ives 8400 Series Protection Plate in Oil Rubbed Bronze

The Ives 8400 is a protection plate that mounts to the face of the door to guard the finish from carts, kick marks, and daily wear. Size: 10" x 34". Edges are beveled on all four sides (B4E) for a finished look and to reduce snagging. Pre-drilled with...

9102-630-RC Don Jo 2-1/4" Extended Lip Strike in Stainless Steel

9102-630-RC Don Jo 2-1/4" Extended Lip Strike in Stainless Steel Finish The Don Jo 9102-630-RC Strike Plate communicates an unmistakable message of superb quality with amazing strength while maintaining a beautiful elegance that is usually not associated...

9125-DU Don Jo 2-1/4" Extended Lip Strike in Duranodic

9125-DU Don Jo 2-1/4" Extended Lip Strike in Duro Coated Finish The Don Jo 9125-DU Strike Plate communicates an unmistakable message of superb quality with amazing strength while maintaining a beautiful elegance that is usually not associated with door...

BB74545-639 Don Jo Full Mortise Ball Bearing Hinge in Satin Bronze

BB74545-639 Don Jo Full Mortise Ball Bearing Hinge in Satin Bronze Finish The Don Jo BB74545-639 Full Mortise Ball Bearing Hinge communicates an unmistakable message of awesome quality and high strength while maintaining a beautiful elegance that is...