Product Description
SF6030E5 — AMSEC SF6030 Gun Safe, ETL 60-minute fire
Long guns get stored in a closet because the safe that would hold them never gets bought — nobody can tell from the listing whether it will clear the ceiling, fit through the door, or survive the floor it is going on. The SF6030 measures 59"H x 30"W x 26"D outside, 54-1/2"H x 26-1/2"W x 197/8"D inside, and weighs 748 lbs. It carries ETL 60-minute fire. At 748 lbs this is a freight delivery and a real anchoring job — check the floor and the path in before you order.
SKU Breakdown
| Segment | Code | What It Means |
|---|---|---|
| Series | SF | SF — fire-lined gun safe |
| Model size | 6030 | SF6030 body — 59"H x 30"W x 26"D outside |
| Lock | E5 | AMSEC ESL5 electronic keypad lock |
Technical Specifications
| Brand | AMSEC (American Security) |
| Part number | SF6030E5 |
| Model | SF6030 |
| Product type | Gun Safe |
| Exterior dimensions | 59"H x 30"W x 26"D |
| Interior dimensions | 54-1/2"H x 26-1/2"W x 197/8"D |
| Door opening | 51-1/2"H x 22-1/2"W |
| Weight | 748 lbs |
| Interior capacity | 28704 Cubic Inches |
| Gun capacity | 15-15-30+2 |
| Fire rating | ETL 60-minute fire at 1200°F |
| Fire test interior hold | Below 350°F |
| Door thickness | 3/16 Inch |
| Steel gauge | 12 ga (Door, Wall) |
| Lock | ESL5 Electronic Lock |
| Anchor holes | 4 |
| Warranty | Lifetime (Theft and Fire) |
| Spec source | Ratings from AMSEC's published specification (americansecuritysafes.com), verified 2026-08-15. Dimensions and construction detail from the AMSEC factory data supplied by our distributor. |
Compliance & Codes
Fire: 1-hour (60-minute) fire rating at 1200°F, verified by ETL / Intertek. The interior stayed below 350°F for the whole test — that interior hold is the half of the spec that matters for what you are storing, because paper chars near 400°F. Intertek is an independent testing laboratory; AMSEC states this test method is consistent with UL-72. It is an independent verification, but it is not a UL fire certification — if a specification says “UL fire rated” word for word, this is a different mark.
How to read these ratings. UL-certified means Underwriters Laboratories attacked a sample and it held — TL-15 and RSC are UL classes. ETL/Intertek verified means an independent lab confirmed the manufacturer's fire test. A factory rating means AMSEC ran the test itself. B-Rate is a steel-thickness construction class and is not a certification at all. Purchasing specifications usually name one of these exactly, and a substitution gets a purchase order rejected. If you are buying to a written spec, read us the line and we will tell you whether this safe meets it.
What's in the Box
One SF6030 safe, factory-assembled with the ESL5 Electronic Lock installed. AMSEC owner's manual and lock programming instructions.
Pro-Installer FAQ
Q: Will the SF6030 fit where I want to put it?
A: Outside it is 59"H x 30"W x 26"D, with 54-1/2"H x 26-1/2"W x 197/8"D of usable space inside. Measure the doorway and any turn on the route, not just the final spot — on a safe this size the doorway is what stops the delivery. Add clearance in front for the door to swing full open.
Q: Does the fire rating protect a hard drive or media?
A: Treat it as paper protection. The rating holds the interior below 350°F, and it is written around paper documents — paper chars near 400°F. Magnetic media and drives start failing well below that, closer to 125°F. For media you want a dedicated media safe or an internal media chest.
Q: Does it have to be anchored?
A: AMSEC provides 4 anchor holes in the base. Anchoring is what stops a safe this size being tipped and worked on its back, where the door is weakest. Anchor into concrete where you can; on a wood floor, through the joist.
Lock Depot sells brand new AMSEC products with the full manufacturer warranty. Questions on fit, anchoring or freight: (877) 365-5625.
Product images are representative and may not depict the exact SKU, finish, or configuration listed. Always verify specifications before ordering.
