13-0882 Sargent 480 Series Deadbolt Cylinder Tail Washer for 484

Product Description

The Sargent 13-0882 is the cylinder tail washer for the 484 double cylinder deadbolt in the 480 Series. It sits on the tailpiece end of the cylinder and takes up the space so the tailpiece lines up with the bolt and the cylinder does not rock.

Sargent builds the 470 and 480 Series deadbolt cylinders the same way: a solid brass plug turning inside the cylinder body, held by a cap on the back end, with the tailpiece passing through to work the bolt. When one small part wears or goes missing, you can rebuild the cylinder on the bench instead of buying the whole C480 assembly.

From the counter: take the cylinder out of the door and lay the parts out in order before you take anything apart, and keep the pins in the plug with a follower if you pull it. A plug that comes out without a follower spills its pins and has to be re-pinned to the key.

Sargent lists this washer for the 484 function only. On a 484 both sides carry a cylinder, so check both cylinders for a missing washer while the lock is apart.

Specifications

SKU Decoder