13-0875 Sargent 480 Series Deadbolt Cylinder Cap

Product Description

The Sargent 13-0875 is the cylinder cap for the 470 and 480 Series deadbolt cylinders. The cap closes the back end of the cylinder body, keeps the plug from sliding out, and guides the tailpiece through to the bolt.

Sargent builds the 470 and 480 Series deadbolt cylinders the same way: a solid brass plug turning inside the cylinder body, held by a cap on the back end, with the tailpiece passing through to work the bolt. When one small part wears or goes missing, you can rebuild the cylinder on the bench instead of buying the whole C480 assembly.

From the counter: take the cylinder out of the door and lay the parts out in order before you take anything apart, and keep the pins in the plug with a follower if you pull it. A plug that comes out without a follower spills its pins and has to be re-pinned to the key.

A cracked or missing cap lets the plug creep back and the key starts to bind. Replace it with the cap pin (13-0691) if the old pin is worn.

Specifications

SKU Decoder