Loading... Please wait...


ALarm Lock Mag Lock kit RR-PM1200PAK


(actual product and finish may vary)

7400-628 Adams Rite UltraLine Electric Strike for Radius Jambs in Clear

$259.00 $139.99
(You save $119.01)

Other Details


Product Description

7400-628 Adams Rite UltraLine Electric Strike with faceplates in Clear Anodized Finish

The 7400 series Electric Strike with 4-7/8" faceplates are specifically designed for Adams Rite deadlatches or cylindrical locksets with 1/2" to 5/8" latchbolt projection. It provides remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type lockset with 1/2" to 5/8" latchbolt projection. It functions in such a way that electrical actuation unlocks strike jaw and thus releasing latchbolt so that the door can be opened without operating latch itself. The Adams Rite 7400 series' extremely compact mechanism very smoothly fits into aluminum jamb (or opposing door) sections as shallow as 1-1/16". It is a direct upgrade for Adams Rite 7100 series electric strikes. The electric strike opens electrically under 35 lbs. of preload.

Recommended for use in aluminum jambs

Benefits and Features:

  • Clear Anodized Finish
  • Aluminum construction
  • Opens under 35lbs of pre-load
  • Grade 1 strength
  • The Adams Rite 7400 can operate in either Fail Secure or Fail Safe modes easily and can run on 12 or 24 volts in DC or AC mode
  • Stainless Steel Split-Jaw is included with 5/8" adjustable x 1-7/16" x 1/2" deep strike opening
  • Available in Zinc-aluminum alloy case of size approximately 1" x 3-3/8" x 1-1/16 deep
  • Perfect solution for storefront doors with Adams Rite hardware
  • UL 1034 burglary-resistant listed hardware
  • For use in aluminum jambs
  • Non handed operation
  • Flat faceplate 1-1/4" x 4-7/8" is included as always
  • 3 year limited manufacturer's warranty is included

Individually boxed including mounting screws, mounting clips and adhesive shims to accommodate jamb or stile extrusion thickness greater or less than nominal 1/8", an adjustable jaw shim pack and two plug-in voltage adapters for 12/16/24 VAC and 12/24 VDC.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!


Back to Top