DynaLock 2280 and 2282 SlimLine Maglock: Part Numbers Decoded

DynaLock 2280 and 2282 SlimLine Maglock: Part Numbers Decoded

Posted by Kent on 8th Nov 2026

The DynaLock 2280 SlimLine, read off the part number

The DynaLock 2280 Series is a surface mount electromagnetic lock with a 1200 lb holding force in a shallow housing. The catalog says it joins the 2268 as an upscale, low profile maglock, and the difference you can see is the housing: the 2280 is milled from a solid aluminum billet as a single seamless piece. The catalog credits that one-piece housing with better resistance to moisture and tampering.

There are eleven parts in the family on our shelf, and the number tells you the door before you read a word of the description. Here is the key.

Step one: single or double, outswing or inswing

The first four digits give you the opening.

  • 2280-US28: single lock, outswing door.
  • 2282-US28: double lock, outswing door. The second number is the double: 2280 is one leaf, 2282 is a pair.
  • 2280TJ80-US28: single lock, inswing door. The TJ marks the inswing version.
  • 2282TJ82-US28: double lock, inswing door.

US28 on every number is the finish: satin aluminum. It is the only finish we list for this series.

If the swing is the part you are not sure about, our 2022TJ guide walks through an inswing and an outswing on a different series. The reasoning is the same.

Step two: the monitor letters

After the finish, the letters add a signal that goes back to your panel. The catalog gives us three.

  • No letters: the lock and nothing else. This is the version for a door that only needs to hold.
  • DSM: door status switch. Per the catalog, it "signals door closed or ajar." Examples: 2280-US28-DSM, 2280TJ80-US28-DSM.
  • HSM: high security monitor. The catalog says it "includes DSM and dynastat force sensor." The force sensor reports that the magnetic bond is working. Example: 2280-US28-HSM, 2280TJ80-US28-HSM.

On a pair of locks the letters take a 2: 2282-US28-DSM2, 2282-US28-HSM2, 2282TJ82-US28-DSM2. Two locks, two switches, two signals.

The difference between DSM and HSM is exactly what the names say, and our DSM2 vs HSM2 guide goes through it in more detail. Short version: the DSM tells the panel whether the door is shut, the HSM also tells it whether the lock is actually holding.

What every 2280 and 2282 shares

  • Holding force: 1200 lbs.
  • Voltage: 12 or 24 VAC/VDC, field selectable.
  • Finish: satin aluminum.
  • Housing, single: 1-1/2 in. D x 2-1/16 in. H x 12-3/4 in. L.
  • Housing, double: 1-1/2 in. D x 2-1/16 in. H x 25-1/2 in. L.
  • Adjustable baseplate with staggered mounting screw holes, to save install time and keep alignment.
  • Armature housing that dampens noise and helps with install.
  • Enhanced top jamb mount: a full-length armature bracket with locking ribs to prevent slippage, and a lock mounting bracket with a concealed wire chase.

The depth is the number to write down. At 1-1/2 in., the 2280 is shallower than the 2268, the other low profile lock in the DynaLock line, which runs 2-3/16 in. deep and 14 in. long.

Where the 2280 beats a bulkier lock

Three places come up again and again.

  1. A tight head. The door has a transom or a closer arm and every inch counts. Write the 1-1/2 in. depth next to your head clearance before you pick a lock.
  2. A frame that people will see. The housing is one seamless piece and the mounting bracket has a concealed wire chase, so the cable stays out of sight.
  3. A door that sees moisture. The one-piece housing is the catalog's answer to water getting in through a seam. The catalog does not give an environmental rating, so we would not put it in a pool-deck door without asking the manufacturer first.

Where it does not fit

  • A door that needs more than 1200 lbs. Step up to the 1500 lb 3000 series. Our holding force sizing guide shows how to size it.
  • A pair of doors with a gap between the leaves. A double lock like the 2282 is 25-1/2 in. long. Measure the head before you order, and check the filler plate chart in our filler plate guide if the frame needs one.
  • A delayed egress opening. That is a different lock, the 3101C, with its own rules.

Which one for which door

  1. Single outswing door, hold only: 2280-US28.
  2. Single outswing door, panel needs to know it is shut: 2280-US28-DSM.
  3. Single outswing door, panel also needs to know the lock is holding: 2280-US28-HSM.
  4. Pair of outswing doors: 2282-US28, with DSM2 or HSM2 if you need signals.
  5. Single inswing door: 2280TJ80-US28, with DSM or HSM.
  6. Pair of inswing doors: 2282TJ82-US28, with DSM2.

What the catalog does not tell us

  • Current draw. The listings give the voltage range but not an amp figure. Size your power supply from the manufacturer's data sheet.
  • Whether a given frame carries a fire listing for this lock.
  • Armature plate dimensions and the exact mounting template. Ask us for the template.
  • An HSM2 option on the inswing double. The catalog shows the 2282TJ82 with DSM2, but not with HSM2 in what we stock.

Our maglock transformer guide covers power supplies for a lock like this one once you have the amp figure.

Common questions

What does 2282 mean compared with 2280?

Same series, double lock. 2280 is a single lock for one leaf and 2282 is a double lock for a pair.

What does the TJ mean in 2280TJ80?

The inswing version. TJ80 is the single inswing lock and TJ82 is the double.

Can I run it on 24 volts?

Yes. It is 12 or 24 VAC/VDC, field selectable.

How strong is it?

The catalog lists a 1200 lb holding force on every part in the series.

What is the difference between DSM and HSM?

DSM reports door closed or ajar. HSM includes the DSM and adds the dynastat force sensor.

See every DynaLock lock on our DynaLock page. Send us the door, the swing and what the panel needs to hear, and we will pick the number.