Hager 3909 vs 3969 vs 3981-BLU vs 3982-BLU: SFIC Core Types
Posted by Kent on 16th Nov 2026
Four Hager SFIC cores that are not interchangeable in practice
A small format interchangeable core is the part with the keyway in it. Pull it with a control key and it is out of the door in seconds, with no rekeying of the lock body. Hager sells SFIC cores in four listings that look alike on a shelf and do four different jobs: the 3909, the 3969, the 3981-BLU and the 3982-BLU.
All four are the same physical format. Hager lists them as a figure-8 profile, .450 in. diameter, brass, non-handed, and meeting ANSI/BHMA A156.5 for interchangeable core cylinders. What separates them is the pin count, whether they come pinned, and what is in the box. That decides who does the work after delivery.
The four, as listed
| Part | Pins | Type | Keyway | Keys |
|---|---|---|---|---|
| Hager 3909 26D | 7 | Uncombinated | H1 | None |
| Hager 3969 26D SFIC KD | 7 | Keyed different | Not stated | Not stated |
| Hager 3981-BLU | 6 | Construction | Best A | 2 operating keys, no control key |
| Hager 3982-BLU | 7 | Construction | Best A | None |
The 3909, 3969 and 3982 are 7-pin. The 3981 is 6-pin. Hager's own wording is that 6-pin is residential and light commercial, and 7-pin is standard commercial. That is a description of where each is usually found, not a code requirement.
3909: the empty core you pin to a system
The 3909 26D is uncombinated, in satin chrome (US26D, 626). The listing says it ships with no pins, no springs and no keys. Your locksmith combinates it on site to the building keyway and the master key system. Operating keys and the control key are ordered separately.
This is the core to buy when you are starting a master key system or extending one. The pin stacks have to be set against one key chart, and only the person holding the chart can do that. If you are doing a whole building, order every core in the keyway at the same time so one person pins them as a matched set. Cores bought one at a time over six months end up pinned by different hands.
The listing gives the keyway as H1. Match that against what the building already runs before you order. A core in the wrong keyway is a core on the shelf.
3969: keyed different, with some details left out
The 3969 26D SFIC KD is a 7-pin core, satin chrome, keyed different. Keyed different means each core has its own key, so two doors with a 3969 do not share a key unless you have them recombinated.
The listing is short. It does not state the keyway, and it does not say what keys come in the box. We will not fill those in. If you need a 3969 to fit an existing system, call us with the keyway stamped on the key or on the old core, and we will confirm before you order. For a stand-alone door that does not belong to a master key system, a keyed different core is the straightforward choice. For anything that does, you want the uncombinated 3909 instead.
3981-BLU and 3982-BLU: construction cores
These two are for the build phase. Every trade on the job needs to get through the doors, so the doors are fitted with construction cores that one construction master key operates. When the building gets its certificate of occupancy, the locksmith pulls the construction cores with a control key and drops in the permanent cores. The cores are the only thing that changes. The door is not touched.
Both are in the Best A keyway. The two differ in pin count and in the box. The 3981-BLU is 6-pin and includes 2 operating keys. Control keys are not included. The 3982-BLU is 7-pin and the listing says no keys are included. If you are buying for a job, count the doors, then count the keys the trades will need, then decide how many cores and how many keys to order, in that order.
One thing in the listing deserves care. The text for the construction cores carries a general line saying the core ships uncombinated and with no pins. That sits next to the line saying the 3981 includes two keys, and a core cannot be both unpinned and key-ready. Treat the specific lines as the fact, ask us to confirm on the exact part, and do not install a construction core without first checking that its key actually operates it.
The same listings advise ordering enough permanent cores and a control key for the swap. That is the real planning step on a construction job.
Check the housing before the core
All four listings say they drop into a standard SFIC housing and note that pin count has to match. The listings say that a 6-pin core in a 7-pin housing will not work without a spacer. So look at the housing, not just the old core. A housing sold for 7-pin cores takes 7-pin cores.
The same SFIC format is used across several makers. If the building already has Best-style housings or other SFIC hardware, the core format matches. We covered the Ilco version of this buying decision, uncombinated against combinated, in our Ilco 28017, 28016 and 28027 comparison. The logic is the same here.
How to pick
Three questions sort it. Is the building on a master key system, or becoming one? Then 3909, pinned by your locksmith. Is it one door, no system? Then the 3969, after you confirm the keyway. Is the building still under construction? Then a construction core, 3981-BLU or 3982-BLU, chosen by pin count to match the housings that are installed.
What the listings do not say
None of the four listings give a lead time for a pinned core, a finish other than satin chrome on the 3909 and 3969, or a bitting. They also do not describe the construction key as a master key or say how many doors a single construction key will open. We have left all of that out on purpose. Ask us.
Common questions
What is the difference between a 6-pin and a 7-pin SFIC core?
Pin count. The listings call 6-pin residential and light commercial and 7-pin standard commercial. The core has to match the pin count of the housing and the key system.
Does the 3909 come with keys?
No. The listing says no keys, pins or springs. Operating and control keys are ordered separately or supplied when the locksmith combinates it.
What is a construction core?
A temporary core used during the build so every trade can use the doors on one key. It is pulled with a control key and replaced with a permanent core at occupancy.
Does the 3981-BLU come with a control key?
No. The listing says it includes two operating keys, and control keys are not included.
Can I put a Hager core in another maker's SFIC housing?
The listings say they fit a standard SFIC housing and name several makers. The pin count and keyway still have to match. Call us with the housing and we will confirm.
The rest of the line is on our Hager page. Tell us the housing, the pin count and the keyway, and we will match the core.