Simplex 74366 vs 742412 vs 74870: Combination Chamber by Series
Posted by Kent on 15th Nov 2026
Simplex combination chamber: match it to the series
The combination chamber is the part of a Simplex pushbutton lock that holds the code. When a chamber wears out, the buttons feel gritty, the code stops working, or you can no longer change it. The lock body can be fine and the door still will not open for the people who should be able to open it.
Simplex sells a different chamber for different lock families. Three are in stock with us, and ordering the wrong one is the usual mistake: 74366, 742412 and 74870. Each is tied to a series by its listing, and that series is what you match, not the way the lock looks.
74366: the 1000, L1000, 8100 and 3000 chamber
The 74366-000-01 is listed as the combination chamber for the 1000, L1000, 8100 and 3000 series. The listing also gives an old number: M56 / M63. If your maintenance file or an old invoice carries one of those, this is the part it points to.
That covers a lot of doors. The 1000 is the original mechanical pushbutton that sits on back offices and storerooms with no wiring and no battery, and the L1000 is the lever version. The 8100 and the 3000 are the other lines the listing names. If your lock carries one of those four, start here.
What the listing does not say is what else ships in the box, so do not assume you get a stop arm or a drive hub with it. If your repair needs one, ask us before you order.
742412: the 2015 series chamber, and what comes with it
The 742412-000-01 is listed as the combination chamber for the 2015 series. This is the one with the longest parts list in the listing, which makes it easier to be sure of what you are buying:
- control shaft sleeve
- stop arm
- drive hub 44122
- screw pack 44122
- 24113-000-01
The listing also says it replaces part number 71241-000-01. If you are holding an old 71241 box, this is the part that took its place. That is the kind of line that saves a call, so check your old part number before you assume you need something new.
74870: the 6200 series chamber
The 74870-000-01 is listed as the combination for the 6200 series. The listing says the chamber includes a stop arm and washer.
One detail to watch. Our SKU is 74870-000-01, and the text in the listing writes the number as 7487-000-01. That is a typing difference in the listing, not two parts. We are telling you so that if you see either number on your old parts or paperwork, you know it is the same item. If your lock is a 6200 and the old chamber has a number you cannot match, send us a photo.
Which chamber for which lock
- Lock is a 1000, L1000, 8100 or 3000: 74366.
- Lock is a 2015: 742412.
- Lock is a 6200: 74870.
The series should be on the lock or the box it came in. If you cannot find it, our guide to the Simplex 5021, 5031, 5041 and 5051 shows how Simplex model numbers are built, so you can read yours.
Changing the code: the bracket and the stud kit
Two small parts exist for combination changes, and they are easy to overlook until you need them.
The 201882-000-01 combination change bracket is listed as for use on older models only. That is the whole caution in the listing, so do not buy it for a newer lock on the chance it fits.
The 201336-000-01 combination change stud kit is listed as including one each of #9, #10, #12 and #16. The listing gives those as numbers only and does not describe them. If you have a lock with a worn stud, or you are rebuilding a chamber and want a spare set, this is the part.
Neither listing tells you how to change a combination. A step-by-step change procedure is not something we have in the catalog. For the change itself, use the instructions that came with the lock, or call us with the model and we will point you to the right procedure.
Replace the chamber or the whole lock
A chamber is a good repair on a lock that is otherwise sound. The case is clean, the lever works, the latch catches, and only the code is the problem. The chamber is the part that wears with use, so replacing it often brings an older lock back to what it was.
It is not the repair when the lock has been forced, the buttons are cracked or the mounting is torn out of the door. At that point a chamber fixes one fault among several. Check the lock body before you order. Our article on the Simplex 1000 mechanical pushbutton lock covers what a complete replacement involves.
Common questions
Which chamber fits a Simplex L1000?
The 74366-000-01. The listing names the 1000, L1000, 8100 and 3000 series, and gives the old numbers M56 and M63.
What does the 742412 include?
Per the listing: control shaft sleeve, stop arm, drive hub 44122, screw pack 44122 and 24113-000-01. It replaces part number 71241-000-01.
Is the 74870 the same as 7487?
Yes. Our SKU is 74870-000-01 and the listing text writes 7487-000-01. They are one part for the 6200 series.
Can I use the combination change bracket on a new lock?
The listing says it is for older models only. Confirm with us before you order it for anything else.
Does the chamber come keyed or coded?
The listings do not say how the chamber ships or what code, if any, it carries. Ask us if you need it to match a specific combination.
All Simplex locks and parts are on the Kaba Ilco Simplex page.