Simplex 75185 vs 201144 vs 204168: Replacement Latch by Backset

Simplex 75185 vs 201144 vs 204168: Replacement Latch by Backset

Posted by Kent on 15th Nov 2026

Simplex replacement latch: three part numbers, two backsets

A Simplex pushbutton lock stops working as a lock long before it stops working as a handle. The lever turns, the button clicks, and the door will not stay shut because the latch inside has worn out. That is the call we get: the lock is fine, the latch is shot, what do I order?

Three Simplex replacement latches cover most of those calls. They look almost the same in a photo and they are not interchangeable. The numbers are 75185, 201144 and 204168, and the first thing separating them is backset.

Backset first: 2-3/8 in. or 2-3/4 in.

Backset is the distance from the door edge to the center of the lock bore. A latch built for one backset will not reach the right spot on a door bored for the other. So measure the door, or measure the old latch tube against the door edge, before you read another word.

  • 75185: listed with a 2-3/8 in. backset. The listing calls it a Simplex 5000 series replacement latch.
  • 201144: listed with a 2-3/4 in. backset. It is described only as a Simplex replacement latch.
  • 204168: listed with a 2-3/4 in. backset. The listing calls it a replacement latch for cylindrical locks, naming the Simplex 5000 and E-Plex series.

If the door measures 2-3/8 in., you are looking at the 75185 and nothing else in this group. If it measures 2-3/4 in., you have a choice between two, and the rest of this article is how to make it.

The 75185: the 2-3/8 in. latch, in two finishes

We stock the 75185-26D-01 in satin chrome and the 75185-03-01 in brass. Same latch, different finish on the faceplate and strike side. The listing for both reads 1/2 in. floating face, includes screws, and says 3 hour fire rated.

The finish matters more than people expect on a door that gets looked at. A bright brass faceplate on an edge where every other piece of hardware is satin chrome looks like a repair. It is also the part of the latch a person sees when the door is open. Match what is on the door now, and if you cannot tell, send us a photo of the edge.

The 201144 and the 204168: two 2-3/4 in. latches

Here is where people guess wrong. Both are 2-3/4 in. backset, both are satin chrome (26D), and both include screws. Only one lists a fire rating. The difference in the listings is the floating face.

The 201144-26D-01 is listed with a 3/4 in. floating face and a 3 hour fire rating. The 204168-26D-01 is listed with a 1/2 in. floating face, and it is the one whose listing names the 5000 and E-Plex lines. Its listing does not mention a fire rating.

We are reporting those numbers the way the listings give them. The listings do not say what the 1/2 in. and 3/4 in. measure on the latch, and we will not guess at it for you. What we can say is that the two are different on purpose, because Simplex lists them as separate parts with separate numbers. Put the old latch next to the new one on the bench. If the faceplate dimension does not match, you have the wrong one.

How to match an old latch to a new one

Pull the old latch before you order. It takes a minute and it saves a return.

  1. Measure the backset on the door, not on the lock. Door edge to bore center. It will be 2-3/8 in. or 2-3/4 in. on the doors these parts fit.
  2. Look for a number on the old latch. If there is a part number on the tube or the faceplate, read it. If you can read 75185, 201144 or 204168, you are done.
  3. Lay the old one on top of the new one when it arrives, or compare it to the listing photo. The faceplate, the latch bolt and the tube should line up.
  4. Check the finish against the strike and the door edge.

If the old latch has no number and the lock is not a 5000 series or an E-Plex, tell us the lock model. We would rather look it up than send the wrong one. Our guide to the Simplex 5021, 5022 and 5025 backset and latch throw covers which complete locks use which backset, which is useful when you are not sure what you are repairing.

The fire rating on the latch

The 75185 and 201144 listings say 3 hour fire rated. The 204168 listing is silent on it, so if you are repairing a rated door, that one needs a question to us first. A rating on a listing is a statement about the latch part as listed. It is not a rating for the whole lock, the door or the frame, and it does not change what the rest of the opening needs. A fire door needs a labeled door, a labeled frame and hardware that is listed for the assembly. If you are repairing a rated opening, a correct latch is part of keeping it rated, not the whole of it. We do not have the label details for your door, so we do not make that call for you.

When to replace the latch and when to replace the lock

A latch is worth replacing when the rest of the lock is sound: the button works, the lever returns, the lock turns smoothly in the bore. A worn latch is the usual reason a door will not catch, drags on the strike, or springs back out of the frame.

It is not worth it when the lock body is cracked, the chassis is loose in the door or the buttons stick. Then the latch is the cheapest part of the problem and you will be back in a month. Our piece on the Simplex 1000 mechanical pushbutton lock lays out what a whole replacement looks like.

Common questions

Which Simplex latch fits a 2-3/8 in. backset?

The 75185. It is the only one of the three listed at 2-3/8 in., and it comes in satin chrome (75185-26D-01) and brass (75185-03-01).

What is the difference between the 201144 and the 204168?

Both are 2-3/4 in. backset satin chrome latches with screws. The 201144 is listed with a 3/4 in. floating face and the 204168 with a 1/2 in. floating face. Compare against your old latch.

Do these latches include screws?

Yes. All four listings say screws are included.

Are the latches fire rated?

The 75185 and 201144 listings say 3 hour fire rated. The 204168 listing does not say. A rating describes the latch, not the whole opening.

Does the 204168 fit an E-Plex lock?

The listing names the Simplex 5000 and E-Plex series as examples. Send us the lock model and we will confirm before you order.

The full range of Simplex parts and locks is on the Kaba Ilco Simplex page.