C480-3-S-4 Sargent 480 Series Deadbolt Cylinder, Medium Tailpiece, S Keyway, Satin Brass

Product Description

The Sargent C480-3 is the cylinder assembly for the Sargent 486 and 475 auxiliary deadbolts, with the medium tailpiece. This listing is the S keyway, a single-section Sargent keyway that Sargent supplies for existing key systems only. It is finished in Satin Brass (US4/606).

Sargent makes three C480 cylinders, and the tailpiece length is what tells them apart. The C480-1 has the short tailpiece and fits the 484 and 474. The C480-2 has the long tailpiece and fits the 485 and 487. The C480-3 has the medium tailpiece and fits the 486 and 475. The wrong length will not work the bolt, so read the model number on the deadbolt before you order.

The keyway has to match the keys already on the job. Look at the stamping on an existing key or on the cylinder face, and match the two letters. A cylinder going into a master key system has to be pinned to that system, so bring the key bitting or the system code to whoever does your keying.

Sargent supplies 480 Series deadbolt cylinders in two finishes only, US4 Satin Brass and US15 Satin Nickel. Pick the one that sits closest to the deadbolt and the lock below it.

From the counter: when one cylinder of a double cylinder 484 wears out, replace both at the same time so the two sides key and turn the same. Check that the tailpiece turns the bolt freely before you tighten the mounting screws.

Specifications

SKU Decoder