Product Description
HPC LHR-HUB — Main Hub for Lever Handle Remover
This is the replacement main hub for the HPC Lever Handle Remover (LHR) tool. If you service commercial doors — hotels, offices, hospitals — you pull lever handles regularly for rekeying, replacing cylinders, or swapping trim. The LHR is the tool that does that without scratching the door or bending the handle, and this hub is its core component.
The hub is the center piece that the arms attach to. Over time and heavy use, it can wear or strip. This is the factory replacement part so you don't have to buy a whole new LHR when one component wears out. Drop it in, reattach the arms, and you're back to work.
Fits the standard HPC LHR Lever Handle Remover. If you're not sure which LHR model you have, contact us and we'll help you match the right part.
Keeping a spare hub on the truck is cheap insurance. The LHR is the fast way to pull a lever for a cylinder swap or rekey without marring the door or the finish on the handle — but it's only as good as its center hub. When the hub strips mid-job the whole tool is down, and a stripped hub on a Friday afternoon shouldn't cost you a Monday. Replace the part, not the tool.
Who this is for & when you reach for it
If your work is commercial doors — hotels, offices, hospitals, schools, multi-family — you pull lever handles constantly: rekeys, cylinder swaps, trim changes, and lock replacements. The HPC Lever Handle Remover (LHR) is the tool that pops a stuck or set-screw-fought lever without gouging the door, marring the finish, or springing the handle. The LHR-HUB is the heart of that tool — the center hub the arms anchor to and lever against.
Under daily professional use the hub takes the load every time you break a handle free, and it's the part most likely to wear or strip first. This is the genuine HPC replacement, so a worn hub doesn't force you to buy an entire new remover. Swap the hub, reattach the arms, and the tool you already trust is back to spec.
Who buys it: Institutional and commercial locksmiths who run an LHR hard enough to wear one out, and shops that keep a spare on the truck so a stripped hub never costs them a callback or a lost afternoon.
Compatibility: Fits the standard HPC LHR Lever Handle Remover. If you're unsure which LHR generation you own, send us a photo of the tool and we'll match the correct hub before you order.
SKU Decoder
| LHR | Lever Handle Remover series |
| HUB | Main hub component |
Specifications
| Manufacturer | HPC |
| Type | Replacement part — main hub |
| For Use With | HPC LHR Lever Handle Remover |
| Dimensions | 3.65" x 8.65" |
| Weight | 0.48 lbs |
Authorized HPC Distributor — Ships brand new in original packaging with full factory warranty. Contact us for expert help.
Warranty Information
HPC / Hudson Lock One-Year Limited WarrantyHPC professional locksmith tools are warranted by Hudson Lock, LLC to be free from defects in material and workmanship for one (1) year from the date of purchase. Within the warranty period, any tool found defective in normal professional use will be repaired or replaced at HPC's option at no charge.
What is covered: Manufacturing defects, material flaws, and workmanship failures under normal, intended professional use.
What is not covered: Normal wear, abuse, misuse, accidental damage, improper operation, unauthorized modification or repair, and damage from use outside the tool's intended application.
To make a claim, contact Lock Depot or HPC/Hudson Lock with your proof of purchase and a description of the defect. Lock Depot is an authorized HPC distributor and will help you process any warranty claim quickly.
