13-0691 Sargent 480 Series Deadbolt Cylinder Cap Pin

Product Description

The Sargent 13-0691 is the cylinder cap pin for the 460, 470 and 480 Series deadbolt cylinders. It is the small pin that locks the cylinder cap to the back of the cylinder body. Sargent lists this pin for cylinders made before June 2003, so check the age of the cylinder before you order it.

Sargent builds the 470 and 480 Series deadbolt cylinders the same way: a solid brass plug turning inside the cylinder body, held by a cap on the back end, with the tailpiece passing through to work the bolt. When one small part wears or goes missing, you can rebuild the cylinder on the bench instead of buying the whole C480 assembly.

From the counter: take the cylinder out of the door and lay the parts out in order before you take anything apart, and keep the pins in the plug with a follower if you pull it. A plug that comes out without a follower spills its pins and has to be re-pinned to the key.

If the cap comes off and the pin is gone, the cap will walk loose and the tailpiece can drop out of line with the bolt. Replace the pin and the cap together when either one is worn.

Specifications

SKU Decoder