Adams Rite 8400-M Mortise Exit Device: Codes, Widths, Switch Kit

Adams Rite 8400-M Mortise Exit Device: Codes, Widths, Switch Kit

Posted by Kent on 18th Nov 2026

The listing that trips people up

A glass door shop calls with a store they are finishing. Aluminum storefront, narrow stile, panic hardware required, and the alarm panel needs to know when the door is open. They find an Adams Rite 8400 on the site, add it to the order, and a week later the door is on site with no switch in the box. That is not a mistake in the shipment. It is how the part is built, and the listing says so in its first paragraph. This article walks through the 8400-M part number so you order the whole assembly the first time.

What the 8400 is

The Adams Rite 8400 is a mortise exit device for narrow stile aluminum doors where code requires panic hardware. The listings describe it as a life-safety device, rated ANSI/BHMA A156.3 Grade 1, with field-selectable handing, so you set the hand while you install it and do not order a left or a right. The body mortises into the stile, which is why it suits an aluminum and glass door and not a hollow metal door with a rim device on the face.

If you are weighing it against a surface-mount or vertical rod option on the same storefront, read our comparison of the 8200 and the 8802 first. The 8400 answers a different question: the stile will take a mortise body and you want a clean door face.

Reading the part number

Take the lead item, 8400-M-270-30-US32D. The listing breaks it into four pieces:

  • 8400: the narrow stile mortise exit device.
  • M: single-switch monitoring.
  • 270: the backset code. In the catalog, the 270 and 280 versions both carry a 31/32 inch backset in the title, and the 370 version carries 1-1/8 inch.
  • 30: the door width in inches. The catalog carries 30, 36, 42 and 48.
  • US32D: the finish, satin stainless.

Finish codes in this family also run US3, US4 and US32 in the catalog. Those are the standard BHMA finish codes, so check the finish of the storefront before you order and match it to the door, not to the photo.

The M means a second line item

This is the part that matters. The listing states it plainly: the monitoring switch is a second line on the order. The M tells you the device is specified for single-switch monitoring so the door can report its state to an access control panel or an alarm. Adams Rite does not build the switch into the device. It ships as a field kit, part number 91-0897-01. A monitored 8400 is two line items: the device and the monitor kit. Order the device alone and you receive the device without the switch.

The second catch is in the same paragraph. On a 30 inch door, Adams Rite requires the MLR option before it will accept monitoring at all. I do not have the MLR detail in the catalog, so I will not guess what it changes. If your opening is a 30 inch door and the panel needs a monitored device, call us with the door details before you order and we will confirm the right configuration. You can see how the MLR suffix works on the 8200 in our 8200 part number guide, but do not carry that over to the 8400 without confirming.

Picking the backset: 270, 280 or 370

Backset is the distance from the door edge to the center of the lever or trim hole. On a narrow stile door it is set by the stile width and by the trim you plan to use, so measure the stile and the existing prep before you pick a code.

  • 270 and 280: both listed with a 31/32 inch backset. The catalog does not say what separates the two codes. Do not choose between them on a hunch. Ask us, and send the door and trim details.
  • 370: listed with a 1-1/8 inch backset, for example 8400-M-370-30-US32D.

The 280 version in satin stainless at 30 inches is 8400-M-280-30-US32D. Replacing a device on an old door is where this gets expensive: if the prep on the stile is for 31/32 inch, a 1-1/8 inch backset will not line up with the trim holes, and nobody wants to patch aluminum.

Width: match the door, not the opening

The width number in the part number is the door width, 30, 36, 42 or 48 inches. Measure the door itself, not the opening or the frame. A pair of 36 inch leaves uses 36 inch devices on each leaf. The 36 inch satin stainless version in the same code is 8400-M-270-36-US32D. If a door has been trimmed or the stile is out of the standard, send us the measurement and we will tell you which width to order.

Trim: keyed or keypad

The 8400 listings tell you what to pair it with. For keyed entry, use an Adams Rite 3080 series trim. For keypad access, the 3090 eForce trim is the keyless option the listing points to. If you are adding electric trim, we covered the 3080E in our guide to the electrified entry trim.

The 3090 listing splits by application. The 3090-01-121 eForce-150 is for the exit device only, in dark bronze. The 3090-02-121 is for MS deadlocks. They look alike. Order the one that matches the hardware: the 3090-01 for the exit device and the 3090-02 for a deadlock. Check that the finish on the trim matches the finish on the device before you order; the 3090 listings shown here are dark bronze while the lead 8400 is satin stainless.

What I would put on the order

  1. The device in the right backset code, width and finish.
  2. Monitor kit 91-0897-01 for each monitored leaf.
  3. The trim: 3080 for keyed entry, 3090-01 for keypad.
  4. A note on the order if the door is 30 inches wide and monitored, so we can confirm the MLR requirement.

What the catalog does not say

I am working from the listings, so here is where they stop. They do not give the difference between the 270 and 280 codes, the details of the MLR option, the stile width the device needs, or a fire rating. They do not list the switch rating or contact type for the monitor kit either. If any of those drive the job, such as a fire-rated door or a panel with a specific input, ask before you order. A guess on a life-safety device is a callback.

Send us the door width, the stile width, the existing backset if there is one, the finish, and what the alarm or access panel needs. We will put the device, the kit and the trim on one quote.