IEI 2000eM Flush-Mount vs 212iLM-BZ Mullion-Mount Keypad
Posted by Kent on 20th Nov 2026
Two keypads, two very different walls
A keypad is only as good as the place you can mount it. On a brick or block wall beside a door, you can cut a box in and sink a single-gang device flush. On an aluminum storefront door, there is no wall. The only place beside the glass is a mullion about as wide as your hand, with a hollow frame behind it and no room for a box.
IEI makes keypads for both situations, and two of them are the subject of this article: the 2000eM flush-mount metal keypad and the 212iLM-BZ mullion-mount keypad in bronze. They are not rivals. They answer different mounting problems, and the number of users each one holds follows from that. If you want the wider IEI picture, start with our guide to the IEI 212W.
IEI 2000eM: flush mount, metal keys, 500 users
The listing describes the 2000eM as a keypad for indoor and outdoor flush mount applications. Here is what it lists.
- A single-gang flush mount design, 2.75 inches wide, 4.50 inches tall and 0.60 inches deep.
- Metal braille alpha-numeric keys, with a brushed metal trim.
- Electronics conformal coated in manufacturing, which is how IEI says the keypad handles indoor and outdoor use.
- 500 users.
- Operating voltage of 10-30 VDC or 12-24 VAC, auto-adjusting.
- Temperature tolerance of -20 to 130 degrees Fahrenheit.
- UL 294 listed.
- A built-in assignable sounder, key press feedback from the sounder and a yellow LED, and a bi-color red and green LED that shows relay status.
- A five year warranty.
The 500 user capacity is the largest number on this page. That matters on a door that serves a lot of people with individual codes, where you want to be able to cancel one person without touching the rest.
IEI 212iLM-BZ: mullion mount, bronze, 120 users
The 212iLM-BZ is built for the storefront case. The listing says it mounts directly to mullion door frames or most flat surfaces with no backbox required. It lists:
- A bronze finish.
- Surface mount, 1.71 inches wide, 6.48 inches tall and 1.13 inches deep.
- Encapsulated electronics, suitable for indoor and outdoor installations.
- Backlit hardened keys.
- 120 users.
- Operating voltage of 12-24 VAC or VDC, auto-adjusting.
- Functionality mode 212, 232. The listing does not explain the difference between those modes.
- A sounder, a door bell relay, and a 1-2 amp relay.
- Temperature tolerance of -20 to 130 degrees Fahrenheit.
The listing calls it a keypad designed for medium to high traffic and rough duty. It is a narrow, tall device, and that shape is why it fits on a mullion. The door bell relay is a feature the 2000eM listing does not mention. If you want the keypad to ring a chime when someone presses a button, check that before you order the other one.
Side by side
- Mounting. The 2000eM sinks into a wall, one box deep. The 212iLM-BZ sticks onto a frame, no box.
- Users. 500 on the 2000eM, 120 on the 212iLM-BZ.
- Keys. Metal braille keys on the 2000eM, backlit hardened keys on the 212iLM-BZ.
- Power. 10-30 VDC or 12-24 VAC on the 2000eM, 12-24 VAC or VDC on the 212iLM-BZ.
- Finish. Brushed metal trim on the 2000eM, bronze on the 212iLM-BZ.
- Extras. The 2000eM lists a relay status LED and UL 294. The 212iLM-BZ lists a door bell relay and a 1-2 amp relay.
The 232SE has already been compared with the mullion keypad. If you are choosing between a surface-mount and a mullion-mount, see our IEI 232SE versus 212iLM guide. The 232SE is a surface-mount model. The 232W and 212W are flush-mount weather resistant keypads. The 212i is an indoor flush-mount model, and we compared it with a ruggedized keypad in our 212i versus 212R guide.
How to pick
Start with the wall. If the keypad goes into masonry or drywall beside the door and you can run the wire inside the wall, the 2000eM is the better device. It is the one with the larger user count and the listed UL 294. If the keypad goes onto a storefront frame or a flat surface where you cannot cut a box, the 212iLM-BZ is built to go on the outside of that frame.
Then count the people. If more than 120 people need their own code, the 212iLM-BZ is off the list. Most small businesses never get near that, but a school, a hospital or a large office can.
Then think about outdoor wear. Both are listed for indoor and outdoor use and for -20 to 130 degrees Fahrenheit. A keypad on a door facing a parking lot sees weather, and a keypad that people hit with a gloved hand sees abuse. The 2000eM uses metal keys. That is the choice I would make for a door that gets hard use, but the 212iLM-BZ lists backlit hardened keys, and I would not call either a mistake.
What these are, and what they are not
A keypad takes a code and closes a relay. It does not lock anything. You need a lock or strike on the door, a power supply sized for both, and a way out. On a door where the keypad is on the secure side, the person leaving needs a request to exit device or a push bar that releases the lock. Plan the wire runs before you mount the device: a flush-mount in a wall needs a conduit path, and a mullion mount needs a way through the frame.
What the listings do not say
I have no current draw, no relay contact ratings on the 2000eM, no information on how many relays the 2000eM has beyond the status LED, and no explanation of what the 2000 Series programming looks like. The 212iLM-BZ lists two functionality modes without naming what they do. IEI's installation guides carry these details, and we will find them for you. Send us the door type and the lock you plan to run, and we will say which keypad fits.